Crown Equipment PW 3000 Series - Manual (Page 8)

Power On & Off
KEY SWITCH
Turn the truck on by turning the key to ON (green dot).
Turn the truck off by turning the key to OFF (red dot).
Always turn the key off when leaving the truck.
POWER DISCONNECT
Pull up on the battery connector or handle to disconnect
the battery and cut all power.
Always disconnect the battery any time the truck isn't
working right. The key switch does not cut all power to
the truck.
Don't use the truck if it's not working right. Report the
problem to your supervisor.
13 Power On & Off
Know the Hazards
Braking
MAKE SURE YOUR BRAKE WORKS
Test the brake on your truck at the start of each shift.
Know the distance it takes to stop before you start
working.
If at any time the stopping distance is too long for you
to stop safely, don't use the truck. Report any problem
to your supervisor.
?
BRAKING
Move the control handle all the way down or all the way
up to apply the brake.
When you let go of the control handle it will automatically
go to the upper braking position. Check the braking before
you start working.
Braking 14
Brake
On
Brake Off
Brake On