SoundMax SM-CMD3000 - Manual (Page 23)

23
System setup
1. Press and hold SETUP button on the RC to enter the setup menu. In Setup mode, press SETUP key
again to quit the setup page.
2. Use the buttons to choose the setup page: General page, Dolby setup, Preference page, Exit.
3. Press the button to enter the setup page selected.
4. Use the and buttons to select the option you want to adjust.
5. Press to enter the adjustment list. Use the and buttons to select the adjustment and press
ENTER or to confirm and return to options list.
6. To return to setup page list press the button in the options list.
Note: The setup is memorized and kept after power off.
General setup page
TV DISPLAY
Normal/PS: When the unit connects to the normal TV set, the wide-
screen image shows on the full screen, but some part is cut off (4:3).
Normal/LB: When the unit connects to the normal TV set, the wide-
screen image shows and black bars appear on the top and bottom of
screen (4:3).
Wide: Use this item when the unit is connected with the wide screen
(16:9) TV set.
ANGLE MARK
It will show the angle mark when playing DVD disc with multi-angle view if selecting On.
OSD LANG
Select on-screen display language.
CAPTIONS
This function doesn't work when the disc without caption. If the caption is Off, press SUBTITLE key on
the remote controller to make caption on. The default setup is On.
SCREEN SAVER
If the Screen saver is set On and the unit is switched on without a disc playing for 3 minutes, a moving
picture appears on the screen.