Garmin Edge 500 - Manual (Page 6)

4 Edge 500 Quick Start Manual
Turning on the Edge
Press and hold POWER to turn on the
Edge.
Configuring the Edge
The first time you turn on the Edge,
you are prompted to configure system
settings and user profile settings.
• Follow the on-screen instructions to
complete the initial setup.
• Press and to view choices and
change the default selection.
• Press ENTER to make a selection.
• Activate and pair the ANT+ ™
sensors during configuration, if
your Edge included a heart rate
monitor and a GSC 10:
◦ Select Yes for the heart rate
monitor question. For setup
information, see page 6 .
◦ Select Yes for the speed and
cadence sensor question. For
setup information, see page 7 .
NOTE: For third-party sensors, refer to
the manufacturer’s instructions, and go
to www.garmin.com/intosports .
icons
Battery charge level
GPS is on and receiving
signals.
GPS is turned off.
Heart rate monitor is active.
Speed and cadence sensor is
active.
Power meter is active.