Garmin nuvi 500 - Manual (Page 9)

nϋvi 500 Series Owner’s Manual
Getting Started
8. Tilt the nüvi back until it snaps into
place.
9. Plug the other end of the vehicle
power cable into a power outlet in
your vehicle. Your nüvi should turn on
automatically if it is plugged in and the
vehicle is running.
Step 4: Configure the
nüvi
To turn on your nüvi, press and hold .
Follow the on-screen instructions.
Step 5: Acquire Satellites
Go outdoors to an open area, out of
garages, and away from tall buildings.
Stop your vehicle, and turn on the nüvi.
Acquiring satellite signals may take a
few minutes.
Step 6: Pair your
Bluetooth ® Headset
You can listen to nüvi audio with your
Bluetooth headset. The first time you use
two devices together, you must “pair”
them. Your Bluetooth headset and the
nüvi must be turned on and be within
10 meters of each other. After the initial
pairing, the two devices can connect
automatically each time you turn them
on.
1. Touch Tools > Settings > Bluetooth .
2. Enable Bluetooth technology on your
nüvi.
3. Under connections, touch Add or
Change .