3M 22 - Manual (Page 3)

PG
2
PG
2
PG
3
• One of the TIME SLOT icons MORN, DAY, EVEN, NITE
comes on. This indicates the TIME SLOT active in the energy
saving program. For program details refer to the energy saving
program chart.
To Change the Program
NOTE: 60 Second Rule-
During programming if a button is not pushed within 60 seconds, the
unit will go out of the set mode. Everything you have input in this
programming will automatically be saved.
• Select either HEAT or COOL by setting the MODE switch.
• Press and hold the
daily PROGRAM button for 5 seconds.
• Select the day you want to program by pressing to cycle through the days of the week to the
desired day.
• Select the Time Slot (period) you want to program
(morning, day, evening, night).
• Select the desired start time of that Time Slot by pressing or to set the time.
This is the starting time of the Time Slot.
• Select the desired target temperature for that time slot by pressing the +/- buttons to select the
desired temperature for that Time Slot.
• Repeat this setting procedure for all four Time Slots
of the day.
• Repeat the setting procedure for all days you want to program.
TARGET
TEMP
HEAT
LINK
RADIO
F mode
day
time
target temp
time slot
temp