MTD 110-111-300 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Upper Handle
Halves (I)
Hex Lock Nuts
(B)
Hex Bolts (A)
4. Assemble the upper handle halves (I) to lower
— handle using five hex bolts (A) and lock nuts
(B). Only tighten finger tight. See figure 4.
Hex Bolts (A)
j
Hex Lock
Nuts (B)
FIGURE 4.
Hex Lock
Nut (B)
5. Place the tab on throttle control between the
upper handle halves at top hole. Secure with
hex bolt (C) and hex lock nut (B) provided in
hardware pack. See figure 5.
Tighten securely all six hex bolts and hex lock
nuts with 7/16" wrench.
FIGURE 5.
This manual is related to the following products: