Assemble gauge wheels to mowep lieck i see fig. 5), Check tire pressure, Check deck le¥elness – Poulan 160886 User Manual

Page 8: Ch^f f fob prope^ï рп^ггон ет at. l belts, Check brake system, Checklist, Ch^f f fob prope^ï рп^ггон ет at. l, Brake

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

A S S E M B L 7

г'.‘Ш

ASSEMBLE GAUGE WHEELS TO MOWEP
liECK I See Fig. 5)

T‘if ■iiiiO*: vv7pseSs зге designed to

rtf «

* r

gjopet poediur. »Pen opsfatmg mo’fiv:. Be

/- n* / -t.

properiy adjusted to ensure optimum mov/er | ► riotiTiai i< •

» AssenbiB gauge whoeS «itn ducio.' с-ь u d,.... Егэ!

surface.

Adjust mower to desired cutting height {See “TO AD

JUST MOWER CUTTING HEIGHT’ in the Operation

section of this manual).

® With mower in desired height of cut position, gauge

wheels should be assembled so they are slightly off the
ground. Install gauge wheel in appropriate hole with
shoulder bolt, 17/32 washer, 3/8 washer, and 3/8-16
locknut and tighten securely,

Repeat for opposite side installing gauge wheel in
same adjustment hole.

CHECK TIRE PRESSURE

The tires on your tractor were overinflated at the factory for
shipping purposes. Correct tire pressure is important for
best cutting performance.

• Reduce tire pressure to PSi shown in “PRODUCT

SPECIFICATIONS” on page 3 of this manual.

CHECK DECK LE¥ELNESS

For best cutting results, mower housing should be properly
leveled. See “TO LEVEL MOWER HOUSING” in the
Service and Adjustments section of this manual.

CH^f F FOB PROPE^Ï рп^ггон ет At. L

BELTS

Л '■ ih' »cli.l h t

mower blade drive bell

ь ilOr< • i il •- i

correctly.

' и tfi

replacing motion anc

/ice and Adjustmenti

the belts are routec

CHECK

BRAKE

SYSTEM

After you learn how to operate your tractor, check toTee
that the brake is properly adjusted. See ‘TO ADJUST

BRAKE” in the Service and Adjustments section of this
manual,

^CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW

TRACTOR WE WISH TO ASSURE TRA T YOU RECEIVE
THE BEST PERFORMANCE AND SATISFACTION FROM
THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST.

/ All assembly instructions have been completed.

No remaining loose parts in carton.
Battery

properly prep.arerl and charged {Minimum

1 hour at 6 amps).

Seat is adjusted comfortably and tightened securely.
All tires are properly inflated. (For shipping purposes,

the tires were overinflated at the factory).

Be sure mower deck is properly leveled side-to-side/

front-to-rear for best cutting results. (Tires must be
properly inflated for leveling).
Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
Check wiring. See that all connections are still secure
and wires are properly clamped.

Before driving tractor, be sure freewheel control is in
drive position.

WHILELEARNING HOWTO USE YOUR TRACTOR, PA Y

EXTRA A TTENTION TO THE FOLLOWING IMPORTANT
ITEMS:

/ Engine oil is at proper level.

Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
Become familiar with all cornols th«n uc alien and

function. Operate them before you st=i the eriqme.

Be sure brake system is in safe operavnq condirion.
It is important to purge thetransmi РсТ гс- operat
ing your tractor for the first time Follow prrD'=4 starting
and transmission purging instructionr (‘'Cr TO Г i ART

ENGINE” and “PURGE TRANSMISSION” m tne Op
eration section of this manual).

✓

/
/