MTD 112-638A User Manual

Page 5

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Lower Struts (Q)

Strut Mount

ing Bracket

4. Place the lower struts (Q) in position on strut

— mounting brackets. Secure with hex bolts (J),

lock washers (G) and lock nuts (H). See figure

4. Only tighten finger tight at this time.

FIGURE 4.

Fuel Tank Mounting

' Bracket(N)

5. Place the fuel tank mounting bracket (N) over

the lower struts. See figure 5. Place upper
struts (P) in position, lining up the holes in the

lower handles, fuel tank mounting bracket and
upper struts. Start by hand hex bolts (I), lock

washers (G) and hex lock nuts (H). Do not
tighten at this time.

FIGURE 5.