Troy-Bilt 12183 - Manual (Page 12)

TROY-BILT® 5.5 HP TILLER MODEL 12183
TRANSMISSION HOUSING, COVERS, SEALS, GASKETS & PLUGS
N0TE1;
THESE SCREWS ARE A SPECIAL
SEALING SCREW THAT £M NOT BE
REUSED WITHOUT RISKING THE
LOSS OF TRANSMISSION OIL.
IF THESE SCREWS ARE LOOSENED
OR RE MOVED, THEY MUST BE
REPLACED WITH NEW HARDWARE.
See Note t
I
REF
No. PART
No. DESCRIPTION QTY.
REF
No. PART
No. DESCRIPTION QTY.
1 9621 Oil Seal-double lip, wheel shaft.... 2 13 20873 Cover-tiller housing, left side.... 1
2 9726 Plug-pipe, 1/4....................... 2 14 1129-1 Gasket-tiller housing cover, .010. A/R
3 97076 Seal-transmission bore............. 1 15 1915089 Screw Kit; includes three (3)
4 1186329 Screw-flanged hex hd., 1/4-20 x 7/8 self-sealing
5/16-18x3/4*..................... 6 screws............................ A/R
5 85030 Oil Seal-input pinion shaft........ 1 16 1115 Cap-rear bearing................... 1
6 11513 Cover-top of transmission (incl. 17 1124-2 Gasket-rear bearing cap, .010
four of Ref. No. 18 and two thick............................... A/R
each of Ref. No.’s 21 and 22).... 1 18 1186331 Screw-flanged hex hd..
7 20694 Gasket-transmission top cover... 1 5/16-18x1*........................ 4
8 20893 Transmission case, tube and rear 19 1915087 Screw Kit: includes five (5)
housing assembly................. 1 1/4-20 X 5/8 self-sealing
9 9467 Plug-gear oil fill hole............... 1 screws............................. A/R
10 20889 Plate-wheel drive cable mounting. 1 21 1100243 Lockwasher-3/8.................... 2
11 97073 Oil Seal-tiller shaft................. 2 22 1100068 Screw-hex hd., 3/8-16 x 3/4*.... 2
12 90038 Screw-flanged hex hd..
5/16-18x5/8*..................... 2
12
Specify GRADE 5 if ordering part locally. A/R - As Required