Troy-Bilt 12183 - Manual (Page 11)

MODEL 12183 TROY-BiLT® 5.5 HP TILLER
BOLO TINES, WHEELS
REF
No.
PART
No. DESCRIPTION QTY.
REF
No. PART
No. DESCRIPTION QTY.
1 1100043 Screw-hex hd., 3/8-16x1-1/4*.... 16 1901118 Replacement set of 16 Bolo Tines-
2 1270-2A Bolo Tine-single, right hand tine includes eight each of right hand
used on left side of tiller (Inch and left hand tines, and sixteen
two of each Ref. No.'s 1 and 3) 8 each of Ref. No.’s 1 and 3...... 1
3 1733398 Hex Locknut, 3/8-16............... 18 9 20918-01 Wheel & Tire Assy-left side, 4.10x6
5 1982612 Screw-hex hd., 3/8-16 x 2, tire mounted on 6” gray wheel.
GRADE 8........................... 2 tubeless pneumatic (10-20 lbs.
7 1270-1A Bolo Tine-single, left hand tine air required), tractor tread..... 1
used on right side of tiller (Incl. 10 20918-02 Wheel & Tire Assy-right side, same
two of each Ref. No.'s 1 and 3) 8 specs, as above................... 1
8 1902154001 Tine Holder-for bolo tines, left 11 9380 Clevis Pin-312 X1-3/4 long......... 2
and right sides.................... 2 12 9338 Hitch Pin.............................. 2
IMPORTANT: Left and right sides of tiller are determined by standing in the operator position
and facing the direction of forward travel.
CUSTOM TILLING TINES (E)CTRA LONG-WEARING)
Special hard-faced tines that are thicker than standard tines for use in sandy, gritty soil, when custom tilling or market gardening
REF
No. PART
No. DESCRIPTION QTY.
10802 Custom Tilling Tine Kit-(!ncludes
8 #2475-1 bolo tines,
8 #2475-2 bolo tines, 16 #1100043
screws and 16 #1733398 locknuts)... 1
REF
No. PART
No. DESCRIPTION QTY.
2475-1 Bolo Tine, custom tilling, left hand.. .8
2475-2 Bolo Tine, custom tilling, right hand . 8
Specify GRADE 5 if ordering part locally.
11