Section 5: contents of hardware pack, Oxo) – MTD 060 Series User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 5: CONTENTS OF HARDWARE PACK
Remove this sheet from your operator’s manual and lay the hardware on the illustration for identification
purposes. After Assembly, keep the Slope Gauge which is on the reverse side of this sheet for future use.
(Hardware pack may contain extra items which are not used on your unit. Part numbers are shown in
parentheses.)
_
_____
A
ATTACHING THE
--------- ---------------- ---
R
ATTACHING THE
LOWER HANDLE
Hex
Bolts
3/8-24
X
1.5
-Long
(710-0459A)
UPPER HANDLE
Split Washers
5/16” I.D.
(736-0119)
Spacers 3/8” I.D. x
7/8” O.D.
(750-0910)^
Cupped Washers
3/8” I.D.
X
7/8 ” O.D.
(736-0105)
Hex Lock Nuts
3/8-24 Thread
(712-0355)
Curved
Head
Hex "Nuts
Bolts 5/16-18 Thread
(710-1250) (712-0267)
C
ATTACHING THE
STARTER ROPE
Rope
Guide
(710-1205)
Hex Lock Nut
1/4-20 Thread
(712-0324)
Di
SECURING THE CABLE
Q
U
Cable Ties - Qty. 2
I (726-0240)
INSTALLATION OF WHEELS
Axle Bolts
—Qty. 4
(738-0533)
Cupped Washers
3/8” I.D. X
1-1/8” O.D.
(736-0331)
Cupped
Washers
3/8” I.D.
X
7/8” O.D.
(736-0105)
(oXo)
Hex Nuts .
3/8-16 Thread
(712-0798)