MTD 241-688A User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Place the upper handle over the lower handle,
lining up the holes. Secure with curved head bolts
(B) and hand knobs (A). See figure 4.
FIGURE 4
Pre-assemble the chute deflector and deflector.
Slide tab on deflector into slot on chute deflector.
Secure deflector to chute deflector with carriage
bolt (J), flat washer (G) and wing nut (F). See
figure 5.
FIGURE 5
Place the pre-assembled chute deflector on the
blower housing. See figure 6. Secure in place with
four flat washers (G) and wing nuts (F).
FIGURE 6