Important, Safe operation practices for power vacuums – MTD 248-670A User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I M P O R T A N T
It is suggested that this manual be read in its entirety before attempting to assemble or operate. Keep this
manual in a safe place for future reference and for ordering replacement parts.
This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see operating section of this manual for
proper fuel and amount.
SAFE OPERATION PRACTICES FOR POWER VACUUMS
1.
Read the operating and service instructing
manual carefully. Be thoroughly familiar with
the controls and proper use of the power
vacuum.
2.
Never allow children to operate this power
vacuum.
3. Keep the area of operation clear of all per
sons, particularly small children and pets.
4. Check fuel before starting engine. Do not fill
fuel tank indoors, when engine is running, or
while engine is hot. Wipe off any spilled fuel
before starting engine.
5. Do not change engine governor settings.
6.
Do not put hands near rotating parts for
any reason.
7. If the power vacuum should start to vibrate
abnormally,
stop
the
engine
and
check
immediately
for
the
cause.
Vibration
is
generally a warning of trouble.
8. Before cleaning, repairing or inspecting make
certain all moving parts have come to a
complete stop. Disconnect spark plug wire
and keep wire away from plug to prevent
accidental starting. Also keep throttle control
lever in the stop i^osition.
9. If the power vacuum should become blocked
with debris at any point shut engine off and
wait until the impeller comes to a complete
stop
before
attempting
to
remove
the
obstruction. Disconnect spark plug wire to
prevent accidental starting.
10.
Check all bolts for tightness at frequent
periods.
11. Never store this power vacuum with fuel in the
tank. Allow engine to cool before starting in
any enclosure.
12. Keep bag and equipment free of debris when
not in use.
13. Never operate this power vacuum unless air
duct and vacuum bag are properly affixed
in their place. Large zippered end of bag must
be closed when operating to prevent objects
from being blown out.
14.
Never empty vacuum bag when engine is
running.
15.
Never change inlet nozzle or auxiliary hose
attachment when engine is running.
16.
The manufacturer recommends that the
operator wear safety glasses or some other
suitable eye protection when operating this
machine.
17. Check the vacuum bag frequently for wear and
replace when necessary.