Operation – Ryobi BTS10 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

OPERATION

straight Cross Cut
Cut made across the grain.

Miter Cross Cut
Cut made with the workpiece at an angle (other than 90°)
relative to the blade.

Straight Rip Cut

Cut made with the grain.

Compound Miter Cross Cut
Cut made with an angled blade on wood that is angled to the
blade.

Non-th rough Cut

A cut in which the blade does not cut through the entire thick

ness of the workpiece.

Bevet Cross Cut
Cut made with the blade tilted relative to the table surface
across the grain.

Page 15