Mr. Coffee 115949 - Manual (Page 13)

BREWING COFFEE NOW
1. After completing the steps in the "Addins Water
and Coffee" section and with the decanter and
the filter basket securely in place, turn the
coffeemaker on.
For Programmable models: press the SELECT
button once to turn the coffeemaker on. The BREW
NOW green light will turn on to signal that the
coffeemaker is on and brewing. The green regular
strength light will come on to show that you are
brewing a regular strength carafe of coffee. The
Audible Ready Signal will beep five times when
the brew cycle is complete.
For Switch models, press the BREW NOW button
and the on light will come on. The green regular
strength light will come on to show that you are
brewing a regular decanter of coffee.
2. To enjoy a more full flavored cup of coffee, press
the Brew Strength button once. The STRONG
Brew Strength red light will come on. The
coffeemaker will remain in the Brew Strength you
have selected until you change it back to regular
strength by pressing the Brew Strength button or
until you unplug the machine.
3. After the used coffee grounds have cooled,
carefully open the filter basket and discard them.
NOTE: For Al I Therma I Models:
Thermal units will shut off immediately
after the brew cycle is complete.
4. Prior to making a second pot of coffee, turn the
unit off. This will reset the FRESH BREW™ TIMER
feature. Switch models - Make sure you turn the
coffeemaker off and then back on before brewing
more coffee, otherwise the two-hour auto shut-off
time period will not be restarted.
NOTE: To turn unit ofh
For Programmable models: press the Select button until none of the
indicator lights are iluminated. For Switch models: press the Brew Now
button, the indicator light will turn off.
©