Mr. Coffee 115949 - Manual (Page 12)

6. Fill the decanter with cold, fresh water to the desired capacity (1 cup equals 5
ounces) (Fisure 6). For easy and accurate fillins, the water markinss on the
Slass decanter and on the dual water windows show the amount of water
needed to make the corresponding desired number of cups. Do not fill past
the “12 cup AAAX line" or water will flow out of the overfill hole in the back of
the water reservoir.
The amount of coffee brewed will always be slightly less than the amount of
water poured in the water reservoir. This is due to the minimum absorption of
water by the coffee grounds.
7. Lift the pour through reservoir lid and pour the water into the water reservoir.
Close the lid and place the empty decanter onto the warmer plate.
NOTE: Make sure the decanter is fully placed on the warming plate or the
water and the grounds will overflow from the filter basket. An overflow may
cause personal injury or damage to property. A
CAUTION! To reduce the risk of damaging the decanter and/or the risk
of personal injury, do not add cold water to the decanter if the
decanter is already hot. Allow the decanter to cool before using.
©