MTD 110-300R000 - Manual (Page 9)

ATTACHING BAG TO MOWER
A
WARNING: DO NOT operate the mower
with the chute door open unless the com­
plete grass catcher is properly mounted on
the mower.
1. Attach the grass catcher frame to grass catcher
hitch bracket on rear of the mower by hooking
grass catcher into hooks on grass catcher hitch
------ bracket. See figure 10.
2. Lift the rear of grass catcher up. The roller on the
grass catcher will push the chute door on the
mower open. See figure 10.
NOTE: Figure 10 is shown with the chute door open
for ciarity oniy.
3. Move the tacking lever forward and hook in slot on
mower. See figure 11.
To remove the grass catcher, lift the rear of grass
catcher, push forward and unhook tacking lever.
Lift off grass catcher.
FIGURE 11.
CONTROLS
Throttle
Control
BLADE CONTROL HANDLE
WARNING
THIS CONTROL MECHANISM IS A
SAFETY DEVICE NEVER ATTEMPT
TO B Y P A S S I T S O P E R A T I O N S
The blade control handle is located on the upper han­
dle of the mower. See figure 12. The blade control han­
dle must be depressed in order to operate the unit.
Release the blade control handle to stop the engine and
blade.
A
WARNING: The blade will be rotating
whenever the engine is running.
THROHLE CONTROL
The throttle control is located on the side of the upper
handle. It is used to regulate the engine speed.
A
WARNING: The throttle control cannot be
used to stop the engine.
RECOIL STARTER
The recoil starter handle is attached to the handle. See
figure 12. Stand behind the unit in the operating posi­
tion to start the unit.