Troy-Bilt 12077 - Manual (Page 3)

PARTS ORDERING INFORMATION
Parts for your machine may be ordered from your local servicing dealer or from the
factory. Please remember that your local dealer or the factory parts department will
need to know the identification numbers of your machine to give you the most efficient
service. Please see below for how to identify and record the identification numbers
for your machine.
When ordering parts, please be sure to provide the following information:
1. The SERIAL NUMBER of your machine.
2. The PART NUMBER of the part.
3. The PART DESCRIPTION.
4. The QUANTITY needed.
If you need engine service or parts:
For engine service or parts, please contact your local authorized engine dealer. Look
in the Yellow Pages of your phone book under “Engines-Gasoline” for the name of
your nearest authorized engine dealer. An authorized dealer can handle all parts,
repairs, and warranty service concerning the engine. NOTE: Some parts on your
engine are exclusive to this machine and may not be available from the engine dealer.
Refer to the engine drawings in this Parts Catalog to identify and order these exclu­
sive parts.
IDENTIFICATION NUMBERS
Please write the Serial Number of your machine in
the space provided below. You can find the loca­
tion of the serial number decal by referring to the
arrow in the illustration below.
All references to left, right, front and rear of the machine
are determined by standing in the operator’s position and
facing the direction of forward travel.
Serial Number:
IMPORTANT:
Some replacement parts that you receive may
vary slightly in shape, color, or texture from the
original parts. This is because certain parts are
supplied to us by more than one manufacturer.
Please be assured, however, that all parts must
conform to our rigid quality specifications, and any
slight variations will not affect the fit or perfor­
mance of these parts.