SINGER WREX 101 - Manual (Page 11)

START SEWING
1 On thin goods or ribbon gauge ( R - 1 2 5 ) should be set utmost
' at extreme right side of machine and should obtom results
shown in Fig. 1 ,
2 For heavier goods, bring gauge to the left as necessary,
3 Do not pull material to help feeding, do not hold material
back, just hold firm but lightly.
PROPER STITCHING
I Proper stitching. 2 Material running
off. Bring gauge
over a little to left.
3 Gauge too for to
left, Move gouge
over to right.
^ Catches on thin fabric every
other time. (Provided needle
is good.)
5^ If catching each time on light
fabric, turn dial to "LESS" until
it looks like Fig. 4.
1 1