Maytag MD9706 - Manual (Page 7)

Note: The dial can be turned in either direction to select a cycle. Once started, the dial
will not advance at a specific rate during the IntelliDry cycles. At first the dial rnay not
advance at all. Toward the end of the cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quickly. This is normal operation.
IntelliDry REGULAR automatically senses the moisture in the load and
shuts off when the selected dryness level is reached. This cycle is
designed for loads such as towels, underwear, t-shirts, jeans, etc. Set the
control to the desired dryness level (more dry - less dry). The triangle
symbol. A, between more dry and less dry is the initial preferred setting
for the majority of loads.
’¡Dry
; a r e /
s s Care
O
InteifiDry
TIME DRY/AIR FLUFF may be
selected for any load if the
,
IntelliDry sensor system is not
desired. Set the control to the
desired number of minutes.
DAMP DRY is designed to “par­
tially” dry items. It provides
approximately 20 minutes of
heated tumbling and 5 minutes of
cool
down tumbling without
heat.
WRINKLE RELEASE will release wrinkles from
items that are clean and dry but slightly wrinkled,
such as from a crowded closet, packed suitcase or
from sitting in the dryer too long after the end of the
cycle. It provides 10 minutes of heated tumbling and
5 minutes of cool down tumbling without heat.