Drawing up bobbin thread, Changing sewing directions – SINGER W1630 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DRAWING UP BOBBIN THREAD
1. Hold upper thread with left
hand, turn the hand wheel
slowly towards you until the
needle goes down and comes
up.
Then
stop
the
hand
wheel when the takeup lever
is at its highest position.
Lightly draw up the upper
thread will be brought up in a
loop.
2.
Pull out both threads and
place them together under
presser foot to the rear of
machine.
CHANGING SEWING DIRECTIONS
1. Lower needle down into fabric and
raise presser foot, pivot the fabric
around the needle to change direction
as desired.
2. Put down presser foot and
start to sew.
-
10
This manual is related to the following products: