SINGER WHA-1 User Manual

Page 8

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

Fig. 9

Thread machine

Pick up bobbin thread as follows;

Holding

the

loose

end

the

needle

thread

your

left

hand,

turn

the

balance

wheel

toward

you

hand

until

the

needle

moves

down

and

again

its

highest

point.

Pull

the

needle

thread

gently

and

the

bobbin

thread

will

come up with it through the needle

hole (Fig. 9). If the bobbin thread

does not rise, check to see if at

lest 3 or 4 inches of bobbin thread

is hanging loosely from the bobbin

THEN PLACE BOTH ENDS OF

THE THREAD BACK BETWEEN

THE TWO PRESSER FOOT TOES

(A) (Fig. 9).