SINGER W1599 - Manual (Page 47)

Oiling
Use oil manufactured especially
for sewing machine use. Other oils
will eventually cause mechanism
to jam.
Apply one drop of oil to hook where
friction occurs.
Replace hook and race cover care­
fully, turn handwheel manually to
insure correct assembly.
Open face cover and apply oil to
points indicated with arrow.
Be careful not to apply too much oil
or it may stain your material and
cause some sewing difficulty.
After oiling, run machine for 1-2
minutes to allow oil to penetrate to
every part.
Remove top cover by loosening
screws @ ® and (c) with large
screwdriver.
Apply one drop of oil to lubricating points indicated by arrows.
- 4 5 -