SINGER 112-4 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
III oi'ili'i'iiif;; fnim (liis list, use ONI.Y the iiiirt NUMBER
in the FJRS'I' coluimi.
The iiumlier stani])eil on a Sewing Maehine Part is in every
case tlie numiier of tlie single part only.
Every eoinbination of ]iai'ts sent out as such has its specific
nuniher, which, although not stamped on the parts, must be
used when ordering the combination.
hluch number always indicates (he SAME PAR'r in whatever
list it aiipeais, or for whatever machine.
d'lie letters after some of the numbers indicate the style of
finish onl\', as follows;
A - Hardened, Polished, Nickel Plated and Buffed
B Polished, Nickel Plated and Buffed
(1 1 lai (lened (inly
1)-- Polished (inly
hi Soft, Not Polished
K Hardened and Polished
11 Blued
,1- .Nickel Plated Only
K- Hardened and .Nickel Plated
L- Bra.ss I’lated
M Oxidized
N- -.lapanned, Dull
P- .lajianned, Bright
K- .Meilized
('opiier Plated
T. A. Hardened, Polished, Copper and Nickel Plated
and Buffed
'1'. B. (topper and Nickel Plated and Polished
T. ,1. (’o|)per and Nickel Plated Only
'r. K. Hai'dened, Copper and Nickel Plated
'r. M. (!o])|ier Plated and Oxiilized
d’. L. ('upper and Bra.ss Plated
U Zinc Plated
V Silver Plated
A\' Polished and Nickel Plated
Z (thiomium I’laled
Z. B. -Polished, .Nickel Plated, Buffed and Chroniiuin Plated
Z. J.- -.Nickel and (throiniuiu Plated
'I'liese letters MUST BE USED when they appear in the list;
and .VP'J'EH the nuniher as in the list.
In this .series:
I to lotili and riOlitll to hUdOO are Screw Numbers
l.oOl to 18(1(1 and Slhdl to 51800 are Nut Numbers
1801 to 20(1(1 and 51801 to 520110 are Holler Niinihers
2001 to 50000 and 52001 and upward are numbers of
Machine Parts
The figures in the second column refer only to the plates,
illustrating till' parts, and are Nd'h T(1 BE USED in ordering.
Parts marki'il with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
Eh931
MACHINE No. 112-4
FOR ABUTTING AND STITCHING VARIOUS WIDTHS OF RIBBONS,
STRAW BRAID WITH FINISHED EDGE AND PYROXLIN
BRAID; ALSO FABRIC STRIPS USED IN THE MANUFACTURE
OF HATS. OVERSEAMING ZIGZAG SINGLE-THREAD CHAIN
STITCH; THE NEEDLE VIBRATES UP TO
% INCH. MAKES
FROM 8 TO 24 STITCHES TO THE INCH. DROP FEED;
FEED DOGS AND PRESSED FEET FDR DIFFERENT VARI­
ETIES OF BRAID. ADJUSTABLE GUIDE FOR DIFFERENT
WIDTHS OF BRAID. TIPPER. BRAID DIVIDING FINGER
HINGED TD THRDW DUT WHILE MAKING THE BUTTDN OF
THE HAT. COMPOUNDTENSION. SELF-SETTING NEEDLE.
FLAT COMBINATION BASE AND DRIP PAN IN PUCE OF THE
ADJUSTABLE BASE. BALANCE WHEEL AND NEEDLE BAR
LEVER ECCENTRIC ND. 64807. DIAMETER OF BELT
GROOVE 2 ! y INCHES. SPEED 2800.
NO. PLATE
*04882 ------
34401 8511
207J 8507
--Vrm, upper and lower (solid)........
“ lind Cover and Belt Guard.
Screw.