SINGER 147-36 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In
in the
oiderin;; from tliis list, use ONLY the part NUMBER
FIRS'l’ column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it ai)pcars, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed
B—Polished, Nickel Plated and Buffed
O—Hardened Only
J)—Polished Only
E—Soft, Not Polished
1''—Hardened and Polished
11 —Blued
.1—Nickel Plated Only
K'—Hardened and Nickel Plated
L—Brass Plated
M—(txiilized
N—Japanned, Dull
P—Jajianned, Bright
R—Merlized
T—Copper Plated
T. A.—Hardened, Polished, Cop|)cr and Nickel Plated
and BulTed
T. B.—Copper and Nickel Plated and Polished
T. ,1.—Coiijier and Nickel Plated Only
T. K.—Hai'dened, Copper and Nickel Plated
'P. M.—Copper Plated and Oxiilized
T. L.—Cojiper and Bra.ss Plated
I)—Zinc Plated
V'—Silver Plated
W—Polished and Nickel Plated
Z—Chromium Plated
Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated
Z. J.—Nickel and Chromium Plated
J'lie.se letters M UST BE USED when they apj>ear in the list;
and AFTER the Jiumber as in the list.
In this series;
1 to 1500 and 50001 to 51500 are Screw Numbers
1501 to IbtK) and 51501 to 51800 are Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbei's
2001 to 50000 and 52001 and upward are numbers of
Machine Parts
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
*7
UST OF PARTS COMPLETE
FOR
E 7 3 7 J J
MACHINE No. 147-36
FOR SHIRTS, UNDERWEAR, CURTAIN WORK, ETC. HAS
POSITIVE RUFFLING MECHANISM ADJUSTABLE FOR
VARIOUS SUE RUFFLE AND UPPER RIGHT HAND AND
LOWER LEFT HAND EDGE FOLDER. TWO NEEDLES, TWO
LOOPERS. GAUGES IN. TO ? » IN. SPEED UP TO 3200,
ACCORDING TO THE MATERIAL BEING STITCHED.
NO. lU.ATt
68028 —
42866 8901
56006 8901
56008 8985
52045 8901
54002 8902
51079 —
64886 8901
56006 8901
N.-tME
Arm, upper and lower (solid) with 94Sn,
51084, 68051 and three 129u.........................
Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Front Bearing.......................
Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing
Arm Oil Tube with 52045, for oiling 54826
“ “ “ Packing (braided cotton)..
“ Rock Shaft.....................................................
“
“ “ 54002 with 54004, 54005
and 64255........................................................
-Ann Rock Shaft Bushing (hack)................. ■. . .
“ Oil Pad
I braided cotton).............................................