SINGER W1210 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting Lower Tension
To test bobbin tension, hang and
shake bobbin case as shown.
At proper tension bobbin case
will gradually drop a small
amount.
To adjust tension, turn adjusting
screw with small screwdriver.
Raise needle in the highest
position.
Leave end of thread of about 10
cm (4") from bobbin case.
Take hold of latch and push
bobbin case into hook.
Release latch when bobbin case
is fully inserted.
Drop Feed Lever
The lever is on right side of hook.
To lower feed dog, move lever
down to
Si
position.
This position is for button sewing,
darning and embroidery.
For normal sewing, move lever
up to ^position.
-12-