Maytag LAT8416 - Manual (Page 5)

Step Select Water Level
(Features
Turn the WATER LEVEL knob
to the setting that matches the
size of the load.
Select models offer infinite set­
tings. Choose a specific setting or
any point in between.
If more water is needed once the
fill is complete, turn the knob to
reset and then to the proper set­
ting.
may vary according to model.)
WATER LEVEL SETTING I LOAD SIZE
WATER LEVEL
MEDIUM
Step © Select Water Temperature
Turn the WASH/RINSE knob to
the desired water temperatures.
Follow the garment care label for
best results. Use the chart at right
as a guide.
REMEMBER: In wash
water temperatures below 65”
F, detergents do not dissolve
well or clean well. Care
labels define cold water as up
to85”F.
WASH / RINSE TEMP
WARM
WARM WARM
COLD
COLD
COLD
Super 3/4 - Full
Large 1/2 - 3/4 Full
Medium 1/3 - 1/2 Full
Small (select models) 1/3 Full
Mini 1/4 Full
REMEMBER: Items must circulate
freely for best results.
WASH/RINSE TEMPS I LOAD TYPE
Hot/Cold
White and heavily
soiled, color-fast
items
Warm/Warm Delicate items
Warm/Cold
Moderately soiled,
colored items; most
Easy Care/Permanent
Press items
Cold/Cold
Brightly colored,
lightly soiled items;
washable woolens
Step Select Extra Rinse lit desired!
OPTION USE
Extra Rinse
(Found on
select models)
Provides additional rinse at the end
of the cycle to more completely
remove laundry additives, suds,
perfumes, etc.
StepQ
EXTRA RINSE
ON OFF
Start Washer
Add detergent.
Add load and close lid.
Pull out control knob to start.
NOTE: The wash/spin speeds are automatically programmed to
assure proper agitation and spinning for each load type. REGU­
LAR cycles will provide a fast wash/spin speed, EASY CARE/PER-
MANENT PRESS will have a fast wash/spin speed along with a
cool-down spray rinse. DELICATES cycle will have a gentle wash
and slow final spin speed.