SINGER W1314 - Manual (Page 8)

Fig. 4
SETTING THE NEEDLE
^ highest point
u ning wheel toward you by hand. Then loosen the needle
mp screw B and the needle clamp C will open itself.
loush ^P^lJideJo^igM) in the needle clamp and
push It upward as far as it will go into the needle clamp hole
astening the needle clamp securely with a screw driver. '
WINDING THE BOBBIN
Disengage the hand wheel (5, Fig. 4) from the stitchina
mechanism by turning the clutch 6 toward you or counter
clockwise. Place a spool of thread on one of the spool pins
lead thread terough the front thread guide on the arm and
down through the tension disc (7, Fig. 5) at the base of the
me. Run end of thread through a hole in the bobbin
edge and place bobbin B on spindle of bobbin winder 4
Lthng the notch on bobbin over small pin on spindle. Push
obbm winder pulley against hand wheel. Hold thread end
loosely and start machine slowly. Bobbin will be released
automatically when it is filled.
Turn clutch away from you until sewing mechanism is
Xeel needle moves when you turn the hand
Break off loose thread end used to start the winding.