Maintenance and adjustment, 1 lower movable knife and fixed knife, 1 lower moval knife and fixed knife – SINGER UT-1 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. MAINTENANCE AND ADJUSTMENT
2-1 LOWER MOVABLE KNIFE AND FIXED KNIFE
IF YOU ARE RESHARPING THE KNIVES, OR CHANGING THE KNIVES, OR
INCASE, TAKING OFF THE TRIMMING KNIFE SET IF NECESSARY AND
YOU WANT TO RE-INSTALL THE TRIMMING KNIFE SET BACK, PLEASE
REFER TO FOLLOWING ITEMS AND ADJUSTING THE RELATED PARTS
INVOLVED.
@ PLEASE MAKE SURE THE POWER IS -OFF*
LOOSENINq-THE COMPRESSED AIR JOINT
AND ADJUSTING THE POSITION OF
LOWER MOVABLE KNIFE IN ORDER
TO MAKE THE MOVABLE KNIFE CAN
BE SLICED EASILY IN THE LOWER
MOVABLE KNIFE GUIDE AND CAN NOT
INTERFERENCE WITH THE KNIFE GUIDE.
WHEN MOVABLE KNIFE MOVED TO ITS
LEFTEST DEAD POINT THERE SHOULD
HAVE A INTERVAL OF 1m.m. BETWEEN
SET SCREW A AND FIXED KNIFE AND
CAN NOT COLLIDE WITH EACH OTHER.
YOU CAN ADJUST THE INTERNAL BY
LOOSEN THE SET SCREW B AND MAKE
SURE THE EDGE OF MOVABLE KNIFE
MATCH EVENLY WITH THE EDGE OF
FIXED KNIFE.
WHEN MOVABLE KNFE MOVED TO ITS
RIGHTEST DEAD POINT, THE HOOK
BALDE OF MOVABLE KNIFE SHOULD
BE RETREAT Im.m. INSIDE FROM
THE BLADE OF FIXED .KNIFE.
MATCH
\ a
EVEN
HOOK SLADE''MOVABLE
KNIFE