Maytag SL-3 - Manual (Page 14)

Dryer Controls At A Glance
Step
J
Select Cycle
InielliDry EASY CARE/PERM PRESS
iiuiomatically senses the moisture in the
load and shuts off when the selected dryness
level is reached. This cycle minimizes wrin-
kies of man-made fabrics such as acrylic,
nylon, polyester or blends with an extended
cool-down which tumbles the load in
unheated air at the end of the cycle. Set the
control to the desired dryness level (more
dry - less dry), The “A” is the initial prc-
fcrred setting for the majority of loads.
Note: The dial can be turned in either direction to
select a cycle. Once started, the dial will not advance
at a specific rate during the IntelHDry cycles. At first
the dial may not advance at all. Toward the end of the
cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more
quickly. This is normal operation.
ySrSie/
P£RM PR£S6
DRYER
MORE
DHY
irmMJiy
COOL
QOfUiN
USM
DRY
flfF
IntelHDry REGULAR automatical­
ly senses the moisture in the load
and shuts off when the selected
dryness level is reached. This
cycle is designed for loads such as
towels, underwear, t-shirts, jeans,
etc. Set the control to the desired
dryness level (more dry — less dry).
The “A" is the initial preferred
setting for the maj ority of loads. ■
TIME DRY/AIR FLLFF may be
selected for any load if the
hiicJUDry
system is not
used: Set the control to the desired
number of minutes.
^ ^ ^ ^ ^
WRINKLE RELEASE will release . wrinkles
from heins that are clean and dry but slight­
ly wrinkled, such as from a crowded closet
or suitcase or from sitting in the dryer too
long after the end of the cycle. It provides 10
minutes of heated tumbling and 5 minutes of
cool down tumbling without heat.
DAMP DRY is, designed to “pai'tial-
ly” dry items. It provides approxi­
mately 20 minutes of heated tum­
bling and 5 minutes of cool down
tumbling without heat.
12