Changing jewing directions, Fastening seams – SINGER W1911 Quilter's Friend User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Changing jewing Directions

1. Stop the machine, and turn the hand wheel toward you to bring

the needle down into the fabric. Raise the presser foot.

2. Pivot the fabric around the needle to change direction as desired.

3. Lower the presser foot and continue the sewing.

Fastening Seams

1. For fastening the ends of seams, press down the reverse button

and sew several reverse stitches.

2. To remove the fabric, raise the presser foot and draw the fabric

away from you.

3. Cut threads on thread cutter at the rear of presser bar or with

a pair of scissors.

Leave about 15 cm (6 inches) of thread through the needle.