Inserting and changing needles – SINGER 3810 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Change the needle regularly, especially if it is showing signs
of wear and causing problems. For best sewing results
always use Singer brand needles.
Insert the needle as illustrated as follows:
•
Loosen the needle clamp screw and tighten again after
inserting the new needle (A).
•
The flat side of the shaft should be towards the back
(B).
•
Insert the needle as far up as it will go (C/D).
Attention:
Turn power switch to "off' before inserting or removing the
needle._______________________________________________
Needles must be in perfect condition.
Problems can occur with:
•
bent needles (a)
•
blunt needles (b)
•
damaged points (c)
□ Inserting and changing needles_________
1 2