SINGER 114-24 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from thia list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part i.s in every
case the number of the single part only
Every combination of parU sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination
Each number always indicates the SAME I'AUT in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A. Hardened, I’olished and Plated
Polished and Plated
Hardened only.
Polished or.ly.
Soft, not Polished,
Hardened and Polished
B.
c.
D.
E.
F.
G.
H.
J.
K.
L.
M
P
R
Blued.
Plated only.
Hardened and Plated.
Brass or Gilt.
Oxidized
Japanned
Parkcrized.
These letters MUST BE USliD when they appear in the list,
and AFTER the number as in the list.
In this series
1 to 1500 and 50001 to 51500 are Screw Numbers
1501 to 1800 are Nut Numbers,
1801 to 2000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
L ¿ 4 2 2
MACHINE No. 114-22
FOR TACKING PAPER TICKETS ON CLOTHING TO DISTINGUISH
LOT, COLOR, SIZE, ETC., WHILE IN PROCESS OF MANU­
FACTURE. MAKES A TRIANGULAR SHAPED TACK CON­
SISTING OF FOURTEEN STITCHES INCH ACROSS THE
BASE AND INCH FROM THE APEX TO THE BASE. THE
LONG STITCH IN THE CENTRE OF THE BASE »F THE
TRIANGLE INDICATES THE PLACE AT WHICH TO START
TO UNRAVEL THE THREAD FOR DETACHING THE TICKET.
SUPERSEDES 114-20 MACHINE.
OBSOLETE
NO. PL.XTE NAME
*59701 ------- Arm with 4449, 59767 and two 164 e . .. .
16532 6976 “ Dowel Pin................................................
4448 6976 “ Oil Tube for intermediate bearing .
56015 6976 " “ “ “ oiling 59705 and 59706
880 e 6998 “ Screw.......................................................
59702 6975 “ Shaft (horizontal).....................................
17703 6981 “ “ “ Bushing (back) .
50333c 6998 “ “ “ “ “
Adjusting Screw........................................