Step select water temperature, Step o select a custom cycle (if desired), Step 0 start washer – Maytag MAV5057 User Manual

Page 5: Step, Select a custom cycle, Start washer

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Step Select Water Temperature

Press the appropriate button to select the

wash and rinse temperatures. Follow the
garment care label for best results. Use
the chart at the right as a guide.

REMEMBER: In wash water temperatures
below 65" E, detergents do not dissolve well

Or clean well. Care labek define coU water
as up to 85“ F.

LOAD TYPE

White and heavily soiled,
color*fast items

Delicate or colorfast items

Moderately soiled,
colored items; most wrinkle

free items

Brightly colored, lightly soiled
items; washable woolens

WASH/RINSE TEMP

HOT

COLD

WARM
WARM

WARM

COLD

COLD
COLD

Step

Select A Custom Cycle

(if desired)

Press the appropriate button to select the custom cycle desired.

CYCLE

USE

Super
Wash

Can be used with any wash cycle to clean very heavily

soiled items. Provides fast agitation throughout the

WHITES and COLORS cycles. Provides fast agitation

for approximately 3 minutes at the beginning of the
DELICATES cycle.

Normal Wash

(select models)

Used for most loads of laundry. See previous page for
cycle descriptions.*

Second Rinse

(select models)

Provides an additional rinse at the end of the cycle to
more completely remove laundry additives, suds, per
fume, etc.

Cancel

(select models)

Press this button to cancel and reset any of the above
options.

* Normal settings on all cycles will change agitation speeds during the

wash time. This is normal.

Step

Start Washer

• Add detergent.

• Add load and close lid.

• Pull the control dial out to start.

CUSTOMIZE CYCLE

SUPER

WASH

NORMAL

WASH

CUSTOMIZE CYCLE

SUPER

WASH

SECOND

RINSE

CANCEL

This manual is related to the following products:

MAV5000