How to remove and replace cloth plate, How to remove and replace cylinder cover – SINGER 14U454B Ultralock User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
9.
HOW TO REMOVE AND REPLACE
CLOTH PLATE
* Remove cloth plate for free arm sewing
(tublar work)
* To remove, pull cloth plate to the left while
pressing the push botton on underside of cloth
plate upward.
* To replace, guide latch on cloth plate into hole
in cylinder cover and push cloth plate to the
right as far as it will go.
10.
HOW TO REMOVE AND REPLACE
CYLINDER COVER
* Removing the cylinder cover exposes the lower
looper for easy threading and cleaning of the
machine.
* Cylinder cover can be removed together with
the cloth plate by pulling the cylinder cover
to the left.
* To replace the cylinder cover together with the
cloth plate, push cloth plate with the cylinder
cover attached, to the right as far as it will go.
* To remove the cylinder cover when cloth plate
is not fitted on the machine, it can be removed
easily by lifting it upward while pulling to the
left.
* To replace only the cylinder cover, place tab on
top of cylinder cover under the throat plate
and press cover downward and to the right.
Warning:
Do not hold the cylinder cover when lifting or
carrying the machine.
Caution:
Be sure cylinder coveris replaced when sewing.