SINGER W1588 User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

18. APPLIQUE WORK

Set machine as shown.

Draw design on material to be

used as an applique and cut it out.
Place cut-out on base material
and baste it.

Sew around outline with zigzag
stitch adjusting stitch length and
width according to shape and

size of cut-out and type of base
material.

To change direction at corners,
or to sew very small circles, stop
machine, positioning needle Just
away from edge of cut-out, lift
presser foot and turn material.
Lower presser foot and continue

sewing.

Sew a few stitches at end with

zigzag width at 0.
This is to prevent unstitching.