SINGER 147-82 - Manual (Page 10)

18 MACHINE BASE
No. Plate Name
131328 ------- Machine Вазе and Oil Drain Jar (swinging
type) complete,Nos.131264 and 131268
MACHINE BASE OIL DRAIN JAR
(SWINGING TYPE)
No. Plate Name
131185 20526 Jar (glass).....................................................................
131191 20526 " Cap.........................................................................
131188 20526 " Clamp.....................................................................
131217 -------- " " 131188 with 131189................................
131189 20526 " " Lever..............................................................
1247C 20546 '' " " Hinge Screw.....................................
131265 20526 Nipple (long)..........................................................................
131266 20526 " (short)..............................................................
131267 20526 " Elbow...............................................................
131268 ------- Machine Base Oil Drain Jar (swinging
type) complete,Nos. 131185,131191,
.131217,131266 and two each 1247C,
131265 and 131267..............................................
THREAD UNWINDER
FOR TWO SPOOLS
Name
Spool Rest (for two spools) with 201018C
" " Cushion (felt)...............................................
" " Rod..............................................................
Set Screw......................................
Set Screw...............................................
" Stand with 200383C...............................................
Thread Guide.................................................................
" " Lock Nut.....................................
■' " Position Cup............................................
" " Rod with 208E and 225322...
" " " Screw......................................
......................... Washer...........................................
" Separator..............................................................
"
” 150085 with 150059................
Bracket.....................................
" " " Arm with 164J
and 9525................................................................
Thread Separator Bracket Arm Clamping
Screw....................................................................
Thread Separator Bracket Arm Clamping
Screw Washer.......................................................
Thread Separator Bracket Arm Screw...........................
" " " " " Washer
No. Plate
225257 20787
150203 20787
225388 20787
200383C 20546
201018C 20546
202490 20787
225391 20787
201696J 20546
225326 20546
225324 20787
20 8E 20546
225322 20546
150085
150086
20787
150059
150060 20787
164J 20546
9525 20546
164J 20546
9525 20546
THREAD UNWINDER 19
No.
150087
Plate Name
----- Thread Separator complete,Nos.164J,9525,
150060 and 150086..........................................
150088 20787 Thread Unwinder complete,Nos.150087,
201696J, 208490,285257,225384, .885386,
225388, two each 150203,825^1 and
three wood screws 7/8 In.No.12.....................
27739 20561 Thread Cone (wood) for large cones..............................
235390 20561 " " Holder, for Inverted cones..
Note: Nos. 27739 and 225390 are used with, but not
Included In 150088.
S I N G E R Needles should be used
in S I N G E R Machines.
These Needles and fheir Containers
are marked with the
Company's Trade Mark “SIMANCO.'* *'
Needles in Containers marked
“FOR SINGER MACHINES"
are NOT S I N G E R made needles.