SINGER W1418 - Manual (Page 17)

REGULATING THE PRESSER FOOT PRESSURE
1. Push down inner pin (A) to increase pressure.
(Light to medium fabrics).
2. Push down outer ring to release pressure, (Heavy
fabrics)
3. Insufficient pressore may cause poor feeding,
sl
4. No pressure adjustment is required when darn­
ing or sewing embroidery.
DROP FEED
Note: Darning plate can be purchased separately.
There are a few times when you want to control the feedirig of fabric by your­
self.
Raise needle bar to its highest position and raise presser foot, place darning plate
over needle plate aligning two pins of darning plate with holes of needle plate.
You may then determine the movement of the fabric by yourself. See page 22
for button sewing application — 13 —