SINGER W1122 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Set needle
position by
towards you

Changing Needle

in the highest

turning handwheel

Loosen needle clamp screw and

take out needle.

With flat face away from you,

insert a new needle into groove
of needle bar.

Push needle until it reaches

stopper (a) and tighten needle
clamp screw firmly.

Proper needle

straight shaft

sharp point

Always use a straight needle with
a sharp point.

Using defective or worn needles
not only causes stitch skipping,
breakage of needles or snapping
of thread: it also can damage
hook and needle plate.

-6-