SINGER 10UJ13 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

8 Correct threading at looper section.

Figure 11

Figure 12

(3) How to thread the upper thread correct

ly (needle thread)

The thread should be inserted in the
order shown in Figure 1 2.
After inserting the thread from the

front to rear through the needle eye
while facing the machine, the end of the

thread should be pulled out about 10

cm.

* Tweezers are helpful for threading

needle eyes.

Note: For overedging, the left-hand

needle should be removed (see
page 14)