Cleaning the machine, Threading the machine – SINGER 1030 Creative Touch User Manual
Page 72
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
L¡ i_'
cleaning the machine
CAUTION: Before cleaning your machine, dis
connect power-line plug from electrical sup
ply.
Your machine will serve you perfectly for many
years if you take a few moments to clean it.
How often you will need to clean the machine
will depend on how often you use it.
Remove lint or fluff from exposed parts.
With a soft cloth or lint brush, clean:
• Tension discs, presser bar, and needle bar
• Take-up lever and thread guides
• Machine surface. (If necessary, dampen the
cloth and use a mild soap.)
With a fine cord or multiple strands of thread,
clean:
• Thread-retainer spring
Open slide plate, remove bobbin, and remove
plate as instructed on page 5.
With the lint brush, clean:
• Area around feed
• Area in and around the bobbin case
With the lint brush or soft cloth, clean:
• Bobbin window (If necessary, tilt machine
back slightly to clean underside of window.)
Your machine requires no oiling under normal
conditions. Your SINGER representative, or
Approved Dealer, will examine the perma
nently lubricated parts whenever your sewing
machine requires servicing.
Thread Retainer Spring
66