Removing bobbin case and bobbin, Inserting bobbin into bobbin case – SINGER W1855 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REMOVING BOBBIN CASE AND BOBBIN

1. Raise needle to its highest

position and open the
shuttle race cover.

2. Open hinged latch of

bobbin case and pull bob
bin case out of machine.

3. Release the latch and bob

bin will fall out easily.

INSERTING BOBBIN INTO BOBBIN CASE

1. Pull off 5cm of thread

from bobbin and insert it
into bobbin case as shown.

10cm

Tension spring

2. Guide the end of thread

into slot.

3. Pull into slot and under

tension spring and draw
out about 10 cm of
thread.