SINGER 148-5 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONI j Y the imrt NflMBKU
in the FJIIST eohiinn.
Tiic number stamped on a Sevrdng Macdiine part is in every
case the number of the single part only.
Every eeimbmation of parts sent out as such has its speeifie
number, whieh, altliough not stamped on the parts, must I)c
used when ordering the eombiuation.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, a.s follows:
A —Hardened, Polished, Nickel I’lated ;iud PutTed
R—I’oUshed, Nickel Plated ami Buffed
('—Hardened Only
D-Polished Only
li—Soft, Not Polished
F—Hardened and I’olished
H—Blued
.1-Nickel Plated Only
K—Hardeneil and Nickel Plated
L—Brass Plated
M—Oxidi/.ed
N—.Japanned, Dull
P—.Japanned, Jlright
R—Merlized
T—t^opper J'lated
T, A.--Hardened, Polished, Oopper and Nickel Plated
anti BulTed
T. B.—Copper and Nickel J’lated and I’olished
T. .J.—Cojjper and Nickel Plated Only
T. K.—Hardened, Copper and Nickel Plated
T. M.—Copper Platecl and Oxidized
T. L.—Copper and Brass Plated
ft—Zinc J’lated
V—Silver Plated
\V—I’olishcd and Nickel Plated
Z—Chromium J’lated
Z. B,—I’olished, Nickel Plated, Buffed and Chromium Plated
Z. J.—Nickel and Chromium Plated
These letters MJ'ST BE J'SED wlien they appear in f he list;
and A1<’TER the number as in the list.
In this .scries;
1 to 1500 and .50001 to 51.500 are Screw Numbers
1.501 to 1800 and 51.501 to 51800 arc Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 and upward arc numbers of
Machine Parts
The figures in the. second column refer only to the plates,
illustrating the parts, and arc NOT TO BE USED in ordering.
Parts marked with an .asterisk (*) arc furnished oidy when
repairs are made at factory.
When ordering parts which differ as to Gauge (the dislance
between .se.ams) the Gauge, as well as the Number must be
given on order.
LIST OF PARTS COMPLETE
FOR
.L /lOfi
MACHINE No. 148-5
FOR SEAM COVERING ON KNIT GOODS, UNDERWEAR, ETC.
TWO NEEDLES ONE LOOPER, GAUGES V g , AND
INCHES. DROP FEED, FOOT LIFTER.
FORMERLY 148 SV3 MACHINE
N M l U
Arm................................................................
“ Back Cover..............................................
.Arm Back Cover eornplete, Nos. ]5.'18n,
.5022:in, .51913, .54915, .54911) and two
1443i)........................................................
Arm Back Cover Batch wdth 91lio...............
“ “ “ “ Hinge Screw....
“ “ “ “ Screw Stud........
“ “ “ “ “ “ Thumb
Nut.............................................................
Arm Back Cover S|)ring...............................
“ “ “ “ Screw......................
“ Oil Cup....................................................
N 1 ) . T ' U . x r n
Pisotll —
.51!) 13 9110
54914
—
,54915 !)I01
502231 ) 9117
91 Iv OKU
B538I) 9101
.54910 9101
1443 d 9101
54,897 9101