SINGER 147-28 - Manual (Page 3)

INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER In the
FIRST column.
The number stamped on a Sewing Machine Part la in every case
the number of the single part only.
Every combination of parts sent out as such has Its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always indicates the 3A№ PART in whatever list
It appeairs, or for whatever machine.
The letters after some of the numbers Indicate the style of
finish only, as follows:
A'Hai-dened, Polished, Nickel Plated and Buffed
A.A-Buffed and Chromium Plated
A.B-Hardened, Polished, Buffed and Chromium Plated
A.C-Brown Baking Enamel Finish
A.D-Qray Baking Enamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated
B-Pollshed, Nickel Plated and Buffed
C-Hardened Only
C .R-Hai-dened and Merllzed
D-Pollshed Only
E-Soft, Not Polished
F'-Hardened and Polished
F.J-Hardened, Polished and Nickel Plated
0-Brlght Rumbled and Nickel Plated
H-Blued
J-Nlckel Plated Only
K-Hardened and Nickel Plated
L-Brass Plated
M-Qxldlzed
N-Japanned, Dull
P-Japanned, Bright
P.P-Wrlnkle Finish
B-Merllzed
S'Cadmlum Plated
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Copper and Nickel Plated Only
T.K-Hardened. Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and Oxidized
U-Zinc Plated
V-3Ilver Plated
W-Pollshed and Nickel Plated
X-Black Oxide, for Iron and Steel
X.G-Hardened and Black Oxide, for Iron or Steel
Y-Dlack Nickel Plated Only
Z-Chromlum Plated
Z.A-Hai-dened,Polished,Nickel Plated,Buffed and Chromium Plated
Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated
Z.C-Hardened and Chromium Plated
Z.D-Pt'llshed and Chromium Plated
Z.O-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated
Z.J-Nlckel and Chromiuni Plated
Z.T-Copper and ClLTOmlum Plated
These letters MUST BE USED when they appear In the list; and
AFTER the number as In the list.
In this series:
1 to 1500, 50001 to 51500 and 14a)01 to 142000
are Screw Numbers
1501 to 1800 and 51501 to 51800 are Nut Numbers
18tH to 2000 and 51001 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures in the second column refer only to the plates,
lllustiatlng the parts, and are NOT TO BE USED In ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory..
When ordering parts which differ as to Gauge (the distance
between seams) the Gauge, as well as the Nu..iber must be given on
order.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-28
For Covering Seams, Necking and Ornamenting Underwear,
also for Sweater Work. Two needles, one looper. Gauges Yg
In., 3/16 in. and in. Gathering Feed. Speed up to 3200.
No. Plate Name
•131129 Arm upper and lower (solid) with 948J,
15404 and two 15405..................................................
T2366 20641 Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Front Bearing...................................
56006 20641 Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing.
56003 20641 Arm Oil Tube with 52045, for oiling
Needle Bar Connecting Link.......................................
52045 20641 Arm Oil Tube Packing (felt)...............................................
11119 20641
fl
“ “ with 52045, for oiling Thread
(upper) Nipper............................................................
68118 20641 Arm Rock Shaft...................................................................
68119
A
* “ 68118 with 54004 and 64255
64386 20641
H
* * Bushing (back)...................................................
446C 20641
0
* " ' " Set Screw..
64388 20641 " “ * " (Intermediate)....
423C 20641
N
* • “ ' S e t
Screw...........................................................................