SINGER 114-56 - Manual (Page 15)

28 NUMERICAL LIST OF PARTS
No. Plate
136697
136698 23198
136699 25263
136701 25263
136702
136703
136705 23197
140431C 25263
150203 25265
175032 25263
175183 25263
175184 25263
175547 23193
190333 23157
200383C 25265
200584D 23193
201018C 25265
201696J 25265
225259 25265
225260
225322 25265
225324 25265
225326 25265
225388 25265
225390 25265
NOTE:
225391 25265
259658 25265
Name
Needle Bar Connecting Link 39203 with 377C, 1518J and
136698 . ..... . ......................... - ............ ..................
Needle Bar Connecting Stud with two 187E, for 136697...
Thread Pull-off Bell Crank with 5101 SAL, for 136676......................
Thread Nipper (back) Eyelet for 136702............................................
Thread Nipper (back) complete, Nos. 1527J, 1743J, 2026,
59773, 59777, 62169, 136701 and two 2921 ...........................
Cylinder End Cover Bracket 62185 with 62111 and
124744, for 136612 ................. . ...................................................
Button Clamp Spreader Lever for 136609
Thread Nipper (front) Thread Guide Screw for 136676. ..
Thread Unwinder Spool Rest Cushion (felt) for 225260 ,
Thread Nipper (frot>t) Lever Rod Spring Washer for
136676 ..................... ......................................... ......... . ........
Thread Nipper (front) Lever Bell Crank Screw Stud for
136676 ......... .................. ................ ..................................
Thread Nipper (front) Lever Bell Crank Screw Stud Nut
Washer for 136676 ... . .
Needle Guide Thread Finger for 136621
Machine Supporting Link Lock Plate Lock Stud for 124966
Thread Unwinder Spool Rest Rod Set Screw for 259658
Pulley (loose) Oil Hole Plug Screw for 68784
Thread Unwirtder Spool Rest Set Screw for 225259
Thread Unwinder Thread Guide Lock Nut for 225260
Thread Unwinder Spool Rest with 201018C, for 225260
Thread Unwinder complete. Nos. 150203, 201696J,
225259, 225324, 225326, 225388,225391,259658
and three wood screws 7/8 in. No, 12, for 60773
Thread Unwinder Thread Guide Rod Washer for 225324
Thread Unwinder Thread Guide Rod with 208AL and
225322, for 225260 .................
Thread Unwinder Thread Guide Position Cup for 225260
Thread Unwinder Spool Rest Rod for 225260
Thread Unwinder Thread Cone Holder, for inverted cones
No. 225390 is used with, but not included in 225260.
Thread Unwinder Thread Guide for 225260
Thread Unwinder Spool Stand with 200383C, for 225260
S I N G E R Needles should be used
in S I N G E R Machines.
These Needles and their Containers
are marked with the
Company's T r a d e Mark "SIMANCO.^
Needles in Containers marked
“FOR SINGER MACHINES”
are NOT S I N G E R made needles. 2
23157 -
>/3
,U.. i
10(i7S
124966
5 f 1
/ /I 596 J
k
12^4764
124959
lbit20 181*23
121*958 \jl