Hunter 22394 Original Multiple Fan Speed Wall Control User Manual

Caution, Caution-risk of electrical shock, F g r m

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

15 AMP SDLID-STATE SPEED CONTROL MODEL E2394

FOR USE WITH AS MANY AS SIX

52' or TEN 42' LISTED WUNTCR SUSPENDED CEILING FANS.

CAUTION:

ALL WIRING MUST BE PERFORMED IN ACCORDANCE WITH
NATIONAL AND LOCAL ELECTRICAL CODES. WE RECOMMEND
INSTALLATION BY A QUALIFIED ELECTRICIAN. DISCONNECT
POWER TO CEILING FANS AT THE MAIN ELECTRIC PANEL

PRIOR TO INSTALLATION.

READ AND SAVE THESE
INSTRUCTIONS

VIRE NUT

MOTOR LINE

CAUTION-RISK OF
ELECTRICAL SHOCK

MINIMUM 2* DEEP

switch

box

POWER LINE
115 VOLTS
60 CYCLE

FACE PLATE

IF 4 VIRES ARE SEEN IN
WALL BOX CONNECT EACH
SPEED CONTROL LEAD TO A
BLACK VIRE. SEE FIGURE.
IF 2 VIRES ARE SEEN,
CONNECT EACH TO A SPEED
CONTROL LEAD. USE VIRE
NUTS SUPPLIED.

SPEED CONTROL-

KNOB

NDTL' USE OF A LIGHT KIT WITH ANY CEILING FAN DECREASES THE MAXIMUM NUMBER

□ F FANS THAT MAY BE SAFELY USED WITH THIS CONTROL. ADD UP THE' TOTAL

WATTAGE OF LIGHT BULBS BEING USED, DIVIDE BY 120, AND SUBTRACT THIS

RESULTANT LINE CURRENT FROM 15 AMPS. WHATEVER IS LEFT IS THE MAXIMUM
CURRENT THAT THE TOTAL NUMBER OF CEILING FANS CAN DRAW. FOR SAFETY,
CONSIDER THAT EACH 52' FAN MOTOR DRAWS 1.0 AMPS AND EACH 42' FAN

DRAWS 0.6 AMPS or LINE CURRENT.

> f I • c « t • « •

}iOO fAttCO AVtMUC

WPHIt TK I > 4

(¿)

MUHTIR RAN COMRAHY

F G R M

4073.0

B . F # 1 3 0 6 A 4 0 0 . ' ? 3

}