Adjusting of the minimum of the top burners – CDA RC9301 User Manual
Page 34
34
Adjusting of the minimum of the top burners
Considering that in the minimum position the flame must have a length of about 4 mm
and must remain lit even with a quick turn from the maximum position to that of mini-
mum.
The flame adjustment is done in the following way:
– Turn on the burner
– Turn the tap to the MINIMUM position
– Take off the knob
– With a thin screwdriver turn the screw F until adjustment is correct (fig. 39).
Normally for LPG, tighten up the regulation screw.
F
Fig. 39