Sears 919.16225 - Manual (Page 5)

Congratulations on yourpurchase of a Sears Craftsman
Power Washer! It is durable and versatile and will serve
you for years to come. Your Power washer combines
air pressure with water, detergent or degreaser to clean
and degrease. It can also be used for spraying lawn,
garden, trees or bushes. It has a unique nozzle that
allows you to change from a direct, forceful blast to a
light, foliage mist with a push or a pull.
A bleeder type connector has been supplied so that the
power washer can be used with compressors that do not
have a pressure relief valve or a pressure switch.
Your Power Washer is designed-to spray in th© follow­
ing modes:
• Air only
* Water only
• Water & air only
* Air & chemicals together
It is not designed to mix water & chemicals internally.
Chemicals should be diluted with water before enter­
ing the gun to achieve precise control of chemicals.
SPECIFICATfON CHART
Your Power Washer is intended for use with a Vi Horsepower or larger tanK-type or tankless air compressors
delivering at least 2.2 SCFM at 50 PSIQ. The larger the air compressor used the more powerful your washer
will be.
Minimum Air Pressure;
Maximum Air Pressure;
Minimum Water Pressure:
Maximum Water Pressure;
Maximum Water Temperature:
Maximum Chemical Draw Height:
(maximum distance washer can be above
the chemical container.)
Optimum Chemical Flow Rate in the Air/
Chemical Mode, with the air pressure
selling between 75 and 125 PSIG;
40 psig
175 psig
20 psig
100 psig.
140“F
10 feet
Approx. 10 oz. per minute with a two foot draw height
Approx, 7 oz. per minute with a five foot draw height
NOTE: Chemicals should have a viscosity (consistency
or thickness) similiar to water-dilute as
necessary.
TOOLS NEEDED FOR ASSEMBLY
2 Wrenches: a Vs" open end wrench for the Bleeder/
Non-bleeder connector and an adjustable wrench for
the air hose,
All other parts on the power washer are tightened by
hand.