Sears 831.280781 - Manual (Page 7)

Adjusting the Resistance
Part List/Expfoded Drawing
To vary the
intensity of
your exercise
on the AB
RESISTER,
the position of
the springs can
be adjusted.
There are three
different posi­
tions. Press the button on one side of the frame as
shown above. Slide the spring forward or backward until
the button snaps into a different hole in the spring.
Adjust the position of the other spring in the same way.
Moving the springs towards the AB RESISTER decreas­
es the resistance. Make sure that the buttons are in
the same holes in both springs.
Storage and Maintenance
When you are not using the AB RESISTER, the handle
can be removed for more compact storage.
To remove the
handle, press
the buttons on
the handle and
slide the han­
dle out of the
side frames. Be
sure to pull
the handle
straight out or
it could bind.
TTie AB RESISTER can be wiped clean wiih a damp
cloth and mild, non-abrasive detergent. Do not use sol­
vents.
*y No. Part No. Qty. Description
1 133134 ; 1 Handle w/Foam Grip
2 131345 1 Headrest
3 132780 1 Frame
4 121642 4 Round Inner Cap
5 130657 2 Foam Pad
6 133133 1 Right Resistance Spring
7 133132 1 Left Resistance Spring
8 131346 1 Exercise Mat
9 133350 2 1 3/4” Screw
10 126650 2 Rubber Foot
11 132724 2 Side Frame
12 132674 2 Frame Spacer
13 132839 4 3 1/4” Screw
14 132704 4 1/4” Barrel Nut
15 110632 4 Button Spring Clip
16 132723 1 Foam Grip
17 131348 1 Training Videocassette
18 132910 1 User’s Manual
19 131417 2 Endcap
Note; Specifications are subject to change without notice.