Sears 437.83235 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

step 11
Lock the base into place by replacing and tightening the
locking mechanism i^ecurely.
Step 12
Adjust the fiiter charitae caiendar(s) to properly indicate
when the next filter ghange is necessary.
Step 13
aner upright and the HEPA air cleaner
Turn the HEPA air cl
is ready for operatioi
STORAGE
If you store your K^hmore HEPA Air Cleaning System
for more than 30 days, we recommend that you;
1. Remove both the
charcoal pre-filter
2. Discard the pre-i
3. Wrap the HEPAf
plastic wrap. Be
primary HEPA fiiter and the
from the unit.
Iter.
Iter in an air-tight plastic bag or
sure that the filter is totally sealed.
To restore the air clfeaner to service:
1. Unwrap the HEPA filter.
2. Install a new activated carbon pre-filter.
3. Replace both filters in the air cleaner.
(see “Filter Replacement” section for proper
installation).
Technical Specifications
Diameter;
12.5 inches
31.8 cm
Height:
14.3 inches
35.8 cm
Weight:
8.1 lbs.
3.7 kgs.
Input Voltage;
120 Volts AC.
60 Hz
Ionization Voltage:
7500 Volts DC
Sears reserves the ri
specification without
jht to change or modify any
notice.
REPLACEMENt PARTS LIST
Filter Replacement:
Charcoal Pre-fliter
83155
HEPA Filter
83154
Component Parts:
Power Head
83235-1
Base
83235-2
Locking Mecriknism
83235-3